摘要 :
It is a common practice to utilize commercially available software tools to design matching networks for wireless communication systems. Most of these tools require a properly selected matching network topology with good initial e...
展开
It is a common practice to utilize commercially available software tools to design matching networks for wireless communication systems. Most of these tools require a properly selected matching network topology with good initial element values. Therefore, in this paper, a practical method is presented to generate matching networks with initial element values. In the implementation process of the proposed method first, the driving point immitance data for the matching network is obtained in a straight forward manner without optimization. Then, it is modeled as a realizable bounded-real input reflection coefficient which in turn yields the desired matching network with reasonable element values. Eventually, the initial design is improved by optimizing the performance of the matched system employing the commercially available computer-aided design (CAD) packages. An example is given to illustrate the utilization of the proposed method. It is shown that new method provides excellent results as a front-end when utilized together with CAD tools.
收起
摘要 :
Usually commercially available software tools are used, to design matching networks for wireless communication systems. But a properly selected matching network topology with good initial element values must be supplied to these t...
展开
Usually commercially available software tools are used, to design matching networks for wireless communication systems. But a properly selected matching network topology with good initial element values must be supplied to these tools. Therefore, in this paper a modeling-based real frequency technique (M-RFT) is presented, to generate matching networks with initial element values. In the proposed method, output impedance data of the matching network are obtained in terms of ABCD-parameters of the load model. Then, they are modeled which in turn yields the desired matching network with initial element values. It is not needed to select a circuit topology for the matching network, which is the natural consequence of the matching processes. Also, there is no need to select the desired transducer power gain level; the proposed technique naturally provides a gain curve fluctuating around a flat level. Eventually, the initial design is improved by optimizing the performance of the matched system employing the commercially available computer aided design (CAD) packages. An algorithm and example are given, to illustrate the utilization of the proposed technique. (C) 2007 Elsevier GmbH. All rights reserved.
收起
摘要 :
In this paper, a new approach based on the real frequency technique (RFT) has been proposed to solve broadband matching problems using cascaded unequal length transmission lines. At the end of the design process, optimum character...
展开
In this paper, a new approach based on the real frequency technique (RFT) has been proposed to solve broadband matching problems using cascaded unequal length transmission lines. At the end of the design process, optimum characteristic impedance and delay values of transmission lines are obtained. Two examples are given to illustrate the utilization of the proposed approach.
收起
摘要 :
In this paper, a practical approach is presented for designing broadband matching networks via reflection function optimization. In the proposed algorithm, the input or output reflection function of the matching network is express...
展开
In this paper, a practical approach is presented for designing broadband matching networks via reflection function optimization. In the proposed algorithm, the input or output reflection function of the matching network is expressed in terms of three real polynomials describing the matching network, load and generator reflection coefficients. Next one of the polynomials is optimized to get minimum reflection function values in the passband. Then matching network topology and element values are obtained via the formed input reflection coefficient expression. Two examples are presented to explain the usage of the new approach. Copyright (c) 2016 John Wiley & Sons, Ltd.
收起
摘要 :
It is always preferable to use commercially available software tools to design broadband matching networks for microwave communication systems. However, for these tools, the matching network topology and element values must be sel...
展开
It is always preferable to use commercially available software tools to design broadband matching networks for microwave communication systems. However, for these tools, the matching network topology and element values must be selected properly. Therefore, in this paper, a practical method is presented to generate matching networks with good initial element values. Eventually, the performance of the designed matching network is optimized by employing the commercially available computer-aided design (CAD) tools. An example is given to illustrate the utilization of the proposed method. It is shown that the proposed method provides very good initials for CAD tools.
收起
摘要 :
To design broadband matching networks for microwave communication systems, commercially available computer aided design (CAD) tools are always preferred. But these tools need proper matching network topology and element values. Th...
展开
To design broadband matching networks for microwave communication systems, commercially available computer aided design (CAD) tools are always preferred. But these tools need proper matching network topology and element values. Therefore, in this paper, a practical method is proposed to generate distributed-element matching networks with good initial element values. Then, the gain performance of the designed matching network can be optimized employing these tools. The utilization of the proposed method is illustrated by means of the given example. It is shown that proposed method provides very good initials for CAD tools.
收起
摘要 :
A comprehensive method of designing a broadband Doherty power amplifier is presented in this paper. The essential limitations of bandwidth extension of a Doherty power amplifier are discussed based on the proposed structure of the...
展开
A comprehensive method of designing a broadband Doherty power amplifier is presented in this paper. The essential limitations of bandwidth extension of a Doherty power amplifier are discussed based on the proposed structure of the Doherty power amplifier, which also takes the output matching networks of both sub-amplifiers into account. The broadband matching is realized by applying the simplified real frequency technique with the desired frequency-dependent optimum impedances. GaN transistors were selected to implement the circuit structure.
收起
摘要 :
In this paper, a new broadband matching network design approach based on reflection modeling is proposed, which has two parts: impedance data generation and modeling. In the approach, firstly the output impedance data of the match...
展开
In this paper, a new broadband matching network design approach based on reflection modeling is proposed, which has two parts: impedance data generation and modeling. In the approach, firstly the output impedance data of the matching network is obtained to get the desired flat transducer power gain in the passband. Next the output reflection data are calculated using the obtained impedance data, then they are modeled as a bounded real function. Then this function is synthesized and the desired lossless matching network with initial element values is obtained. A double matching example is solved to illustrate the use of the proposed approach. It is seen that proposed approach provides suitable initials for CAD tools for final trimming.
收起
摘要 :
The application of the real frequency technique in broadband phasing network design is proposed. The technique uses real frequency load data over any prescribed frequency band for the design of a phasing network. The advantage is ...
展开
The application of the real frequency technique in broadband phasing network design is proposed. The technique uses real frequency load data over any prescribed frequency band for the design of a phasing network. The advantage is that no circuit topology or analytic form of the transfer function is required.
收起